HOME

CUMMINS INDEX

ENG/GENERATOR DIVISION

CONTACT US

            Cummins Custom Pak

Your Cummins Industrial Engine product distributor:

DIESEL PARTS & SERVICE Pty. Ltd.
21 Hilda Street, Hamilton, Brisbane, QLD 4007,AUSTRALIA

Ph: (07) 32681062 Fax: (07) 38681330
Email: info@dieselparts.com.au

STD CONTROL PANELS: 
Engines are supplied with one of the following panel options as standard scope
A Series Cummins basic control start panel with shutdown on low engine oil pressure and high engine water temperature with hour meter and key start switch fitted.
Murphy shutdown panel if required on the A series is an optional extra.  Contact us for details.
B
C
M Series
Std panel: enclosed control instrument panel with MURPHY switch guages and shutdowns on oil pressure and engine water temperature, with guages for voltmeter, tacho/hourmeter, including key switch, panel mounting bracket with rubber mounts.
Irrigation panel: as above with the addition of a Murphy 0-150 PSI pump pressure switch guage with on/off toggle switch and irrigation time clock shutdown system.






Q Series Std panel: enclosed control instrument panel with MURPHY "PowerView" electronic display system showing engine rpm, run hours, oil pressure, engine temp, fuel rate, fuel economy, fuel consumption, engine load, voltage, service schedule information and other parameters, key switch, run selection switch, speed toggle switch, 9-pin J1939 diagnostic port, panel mounting bracket with rubber mounts.
Irrigation panel: As above with addition of Murphy 0-150 PSI pump pressure switch guage with on/off toggle switch and irrigation timne clock shutdown system.
CONTROL PANEL OPTIONS:
Custom made panels to suit your requirements.  Advise us what you require.  Radiator fluid level alarm, engine sump oil level alarm, emergency stop, amber run light, alarms, auto-start panels, engine speed control panels, remote start/stop and remote control panels, fire pump control panels, additional gauges fitted to the above std panels, longer wiring looms.
CUMMINS ENGINE OPTIONS:
Pusher fan / bellhousing and flywheel / auxiliary front engine pulley / 12v or 24v airstarter system / auxilliary hydraulic power take offs / pre-cleaner and aircleaner options / residential muffler exhaust systems / extending mounting bases / air compressor fitted, etc.
AUXILIARY OPTIONS:
Radiator fluid level indicator / oil sump fluid level indicator / automatic oil regulator supply system / quick connection oil drain system / oil sampling point / engine heaters for water jacket and engine oil sump / emergency air shutoff / flexible mounts for under Cummins Custom Pak engine power unit, auxiliary hydraulic pumps.
PTO POWER TAKE OFF:
PTO clutch shafts for inline and side load drives, PTO stubshafts for inline drives, inline flexible drive coupling and highly flexible (torsional vibration absorbing) drive couplings, layshaft and bearing assy for high side load drives, hydraulic reduction gearboxes, hydraulic PTO clutches, mechanical reduction gearboxes, universal cardin drive shafts, hydraulic pump mounting adaptor kit drives, hydraulic pump splitter gearbox drives.